Demystifying Shower Unit Installation - Everything You Need To Know

Demystifying Shower Unit Installation - Everything You Need To Know

Blog Article

Prices & Booking

Just about everyone is bound to have their own conception about How to Install a Direct-to-Stud Shower Enclosure.

A successful shower installment needs cautious planning and also a great deal of work. In many cases, you will require to do 3 kinds of tasks: mounting wall surfaces, setting up the plumbing, as well as finishing wall surfaces.

Preparation

Firstly, you have to select the type of shower that you wish to mount. It is very important to ascertain whether the selected shower is capable of handling certain systems and also can regulate a secure level of water via the boiler. Most shower systems nowadays are created to be flexible to various water pressures (such as saved hot water as well as cool mains).
It is additionally important to think about the water pressure and also the planning of the piping as well as drainage for the shower

Different Sorts Of Shower Units

Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower unit can be attached to the bath tap based on your requirement, and also the water temperature can be changed via the taps. Push-on mixers are cheap and also extremely basic to install. Nevertheless, although the tube connection is basic, it is conveniently dislodged. Furthermore, it is inconvenient to change the temperature level.

Bath/Shower Mixer: The tube and also spray of this type of shower are combined with a bath mixer faucet, and also the temperature level can be adjusted through the bath taps. It is an extremely low-cost alternative as well as no added plumbing is entailed. Nonetheless, the bath/shower mixers also struggle with troublesome temperature level control alternatives.

Manual Mixer: The tube as well as spray of a hands-on mixer shower system belong of the wall surface system and also the cold and hot water products are attached to a solitary shutoff The temperature level and also stress of the water are regulated via either one or a selection of handles (in extra pricey showers). Although temperature level control is a lot easier in hand-operated mixer kinds, they are extra pricey than the formerly stated mixers. They additionally call for added plumbing of cold and hot water system pipes.

Thermostatic Mixer: The hose and spray of this shower type belong of the wall surface device as well as the cold and hot water materials are connected to a single valve below also. It is full with an integrated stabiliser to self-adjust the water temperature and to prevent it from becoming also warm. One of the biggest benefits of a thermostatic mixer shower type includes hassle-free temperature level control. Nevertheless, it is the most expensive of the various mixer alternatives.

Power Shower: A power shower is a solitary unit containing an effective electric pump that is capable of altering both the water stress as well as temperature. This type of shower can be fitted if there is water from a cold water tank and a hot water cyndrical tube. A power shower makes the modification of both stress as well as temperature easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is provided by a combination boiler under mains stress.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and it warms the water electrically. It is very important to note that for this shower type to be mounted, the keys pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The device permits the temperature level and stress to be readjusted by means of a knob. Versions with temperature stabilisers are better as they continue to be untouched by other faucets in other places in use within the family. A major downside of electric showers is that the control knob just allows for the alternative of heats at less stress, or reduced temperatures at a better pressure. This is bothersome in the winter season when the spray is commonly weak and the mains water is cooler. Nevertheless, this trouble is dealt with in some versions which are offered with a winter/summer setup.

Method

Relying on the kind of shower you desire to install, the shower head have to either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it has to have a check valve.
Prior to beginning, it is recommended to note the positions of the shower head and control, as well as to intend the pipe-work involved. Furthermore, the water drainage system to remove the waste water will certainly need to be prepared. Both placements of the cable path as well as the shower button will likewise require to be considered if an immediate or electrical shower device is being installed.
Utilize the guideline guide provided with the shower system to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is important to cut off the water system. In order to shield the pipes, they ought to be provided a waterproof covering and likewise fitted with separating valves. The pipelines can after that be hidden into the wall as well as glued over to neaten the general appearance.
Fit the base tray, shower head, and also installations.
Connect the primary shower control to the pipelines that will be providing the water (This may need a female screw thread adapter).
Reconnect the water and also examination the pipelines for any leaks, as some may need tightening up.
If you are setting up an electric shower, bear in mind to turn off the power supply before making any electrical connections. Once these connections have been made (there ought to be support within the instruction manual), the power supply can be switched back on.

Changing Water Stress to Match Your Shower

The cold water storage tank can be lifted to a greater height (often just 150mm (6inches)) by installation a solid wood support beneath it - possibly composed of struts as well as blockboards. If you select this choice, the major and also circulation pipelines will certainly also have to be raised to meet the new height of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be linked right into the power supply in order to run.

Piping as well as Drain

It is best to utilize 15mm diameter supply pipes, and make the runs to the shower as short and straight as possible so as to maintain optimal stress and also reduce warmth loss. In addition, by minimising the use of elbows for pipe corners, you can lower the resistance in the circulation of the water. You can attain this by flexing the pipelines instead.

Many Common Mistakes

Violating or ignoring neighborhood code constraints.

Using pipes that are also tiny.

Connecting copper to galvanized without utilizing a brass or dielectric fitting between both.

Not making use of tape or pipeline substance at threaded joints.

Uneven your components when installing them.

Not installing an air gap loading for components.

Cutting supply stub outs too brief to mount the shutoff valves onto after the completed wall is in location.

Not correctly aligning tubes into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will certainly cause a leak.).

When transforming the water back on in your home, constantly run the outdoors hose pipe shutoff or purge your bathrooms to bleed dust as well as air from the lines. This debris can create issues in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I found that post about How to Install a Direct-to-Stud Shower Enclosure while surfing the web. Enjoyed our posting? Please share it. Let another person discover it. Many thanks for going through it.

Schedule A Free Estimate

Report this page